Guide :

where would decimal go for 9 tenths

where does . go in 9 tenths

Research, Knowledge and Information :

Decimals - Tenths - Helping With Math

With Decimals; Decimals - Tenths; Decimals - Hundredths; Decimals - Thousandths; Rounding; To Nearest 10; ... Identifying and writing decimals - tenths . Sign-up ...
Read More At :

Numbers with One Decimal Digit - Tenths - Homeschool Math

This is a complete lesson with instruction and exercises about numbers with one decimal digit (tenths), meant for fourth grade. ... Sums that go over over the next ten;
Read More At :

What place dies the decimal go for nine tenths -

What place dies the decimal go for nine tenths? SAVE CANCEL. already exists. Would you like to ... Once you pass the decimal place, you go into the negative exponent.
Read More At :

Decimals - Math is Fun

We can think of a decimal number as a whole number plus tenths, hundredths, etc: ... Decimals Index Decimal Worksheets Powers of 10 Rounding Numbers Adding Decimals ...
Read More At :

What is 9 month as a decimal fraction -

I guess you mean 9 months as a fraction of a year. 1 year = 12 months ⇒ 9 months = 9/12 of a year = 3/4 = 0.75 . Go. ... and Decimal Values What is 9 month as a ...
Read More At :

Tenths, Hundredths, and Thousandths -

Write a decimal for each fraction or mixed number. 9. a. b. c. 6 10. a. 0.5 b. 0.21 c. 0.06 35 100 265 1000 3 10 ... Four and seven tenths (decimal) 21. Six million, ...
Read More At :

Decimal Place Value — One Decimal Digit

Decimal Place Value — One Decimal Digit. ... Nine is in the tenths place. It means 42.9 has 9 tenths or tenth parts. ... Sums that go over over the next ten;
Read More At :

Rounding with Decimals -

Rounding with Decimals. Toggle navigation. ... If the tenths place is 4 or below, we let it go. ... There is a 9 in the tenths place and a 4 in the hundredths place.
Read More At :

Introduction to Decimals - Math Goodies

The decimal point is used to separate the ones place from the tenths place in decimals. ... Lessons on Decimals, Part I: Introduction: Reading and Writing Decimals:
Read More At :

Suggested Questions And Answer :

can you divide a smaller number by a bigger number and have a remainder?

To answer that, change the dividend into a decimal. Now it would be 2.00 divided by 3. The answer would be 0.66666666666666666 OR six tenths + two-thirds.   If you do another number, like 2 divided by 5, you do the same thing. Answer would be 0.40 or 0.4 because there are infinite zeros behind the decimal
Read More: ...

what is the answer to 7.5=125,000(4/5)t?

Simplify the right side first: 125000*4/5*t=100000t. To get rid of the decimal we can multiply both sides by 10: 75=1000000t. So t=75/1000000=0.000075 or 7.5*10^-5. That may not be the answer you're looking for. Assuming the cost of the bulldozer was 125,000, after the first year it would depreciate by 1/5=25,000. At the start of the second year it would be worth 100,000. At the end of the second year it would depreciate by another fifth=20,000, so it would be worth 80,000 at the start of the third year. By the end of the third year it would depreciate by another 16,000 and be worth 64,000 at the start of the fourth year. At the start of the fifth year another 12,800 would be lost making its value 51,200. At the sixth year it would be worth 40,960 and at the seventh year 32,768. After another sixth months, assuming a prorata depreciation it would lose only one tenth its value 3,276.80 so would be worth 29,491.20.
Read More: ...

What is 137918.22 rounded to the nearest tenth?

???????????? "I'm thanking that yu woodnt" ??????????? . . . . me dont thank so . . . round1(137918.22)=137918.2
Read More: ...

what is 3.768 rounded to the nearset hundreth

rounding to the nearest hundredth would be 3.77 the first number after the decimal is the tenths place the second number after the decimal is the hundredths place the thrid number after the decimal is the thousandths place because the number in the thousandths place is over 5 you increase the number in the hundredths place by one and drop the thousandths place all together.
Read More: ...

What is 10% of $300.000

What is 10% of $300.000 Well, 10% is 10/100, which is a tenth, (1/10) You have 300 dollars and a tenth of 300 dollars is 30 dollars. When you divide a number by 10, all you do is shift the decimal poiont one place to the left. So your answer is 30 dollars. You have been writing the fractional part of a dollar amount as thousandths of a dollar, viz. $300.000 If you wish to keep the same specification, then the answer would be $30.000
Read More: ...

how would you write 9 tenths and 36 one hundredths?

how do you write seven and twenty hundredths in decimal form? 7.20 or 7.020 or 7.02??? want to put the 2 in the hundredths spot but can u have a zero at the end? arn't you supposed to drop it?
Read More: ...

round 44.2831 to the nearest hundreths

First we need to identify where the hundreths place is. Starting with the 4 at the tens place, the second for is the ones place after the decimal we have the 2 at the tenths place the 8 at the hundredths place and the 3 is in the thousandths place.  To round we look at the number directly following the place we need to round to. Since we want to round to nearest hundredths we look at the 3. If it is below 5 we round down. If it is above 5 we round up.  3 is below 5 so we round down. The answer in this case would be 44.28
Read More: ...

what is 25 rounded to the nearest tenth

25.00 I put two decimal places because we need to round to the tenth.  The answer is 25.0
Read More: ...

Here I will give you more about percents. View this and try to answer it please. :)

This time the grid has 50 squares. 25 are shaded. shaded/grid size=25/50=1/2. As a ratio this is 1:2, as a fraction it is 1/2; as a decimal, we count how many digits there are in the denominator and then we write 1 followed by as many zeroes: so, there is one digit in the numerator, giving us 10, which we multiply by 1/2, to give us 5. That means the equivalent of 1/2 is 5/10 or 5 tenths. The first decimal place after the decimal point is the tenths position. 0.1 means 1 tenth. So 5 tenths is 5 times as big: 0.5. 1/2 is 0.5 as a decimal. As a per cent (which means out of 100), we multiply 1/2 by 100=50, so 1/2 is 50%. Another way of converting 1/2 into a decimal is to divide 2 into 1 like this: .....0 . 5 2 | 1 . 0 (treat this as 10 but leave the decimal points lined up)
Read More: ...

how do you work out: 3+7=....(finite 5)

Not sure what you're asking here. Are you trying to sum 3 and 7 to a different base? In decimal the answer of course is 10. 10 means the base as a number to that base. If the base was 5, 10 would be the number 5 itself. If the base was 2, 10 would be the number 2. In base 5 we would count 0 1 2 3 4 10 11 12 13 14 20, corresponding to the numbers 0 to 10 in decimal. In base 5 we only use digits 0 to 4; in binary (base 2) we only have digits 0 and 1. In base 10 (decimal) we only have digits 0 to 9. In base 16 (hexadecimal) we have to invent symbols for digits we don't have: there's no single symbol after 9, so we use letters A to F to represent what we would write in decimal as 10 to 15. 10 in base 16 is the same as 16 in base 10. What's 16 in base 5? Well it's 3 times the base plus 1: 31. What is 16 in binary (base 2)? 10 stands for 2; 100 stands for 4 (2 squared); 1000 stands for 8 (2 cubed); 10000 stands for 16 (2^4). 3+7=20 in base 5 and the sum totally in base 5 would be 3+12=20.
Read More: ...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 7.8128 seconds